Pool Pump Wont Prime. If your pool pump wont prime that means that it is not able to relapse all of the air from the pump and is not moving water through it. Priming is the process of creating a vacuum effect so the pump can pull water out of the pool, pass it through the filter and push the filtered water back.
Air lock exists when the pool and spa plumbing rises above the horizontal typically the pump eventually will prime, but not without heat being generated on the pump and fittings. Try with one open suction valve and one open. Pump prime loss suction leak determined by installing clear check valve on inlet of pumping station.
Checked for air leaks and cannot find.
Ive replaced both fuses, the relay, the fuel pump, i changed out the wiring thats in the cabin to the pump. Understand the pump will only run a couple of seconds with ign on, then again cranking, then again when the puter figures the engine is running. Here are 6 reasons why failure to prime occurs. The motor cranks but the fuel pump doesnt prime at all and i have power to the fuel pump.